Dec 17, 2022 Leave a message

What is the function of the valve adjusting screw?

The accurate valve clearance of the engine can ensure the normal power output of the engine. Excessive valve clearance will lead to engine noise, and insufficient intake and exhaust of the engine due to incomplete opening of the valve will lead to power reduction; The valve is too small, which directly affects the normal starting of the vehicle. After starting, the power is insufficient. This is because the valve cannot be completely closed, which reduces the compression ratio of the cylinder, and the mixer in the cylinder cannot be completely burned. At the same time, the fuel consumption will increase without reason. The engine has a crisp noise, most likely due to excessive valve clearance. Please do not adjust by yourself. It is recommended to find professional maintenance personnel to adjust;

If you want to do it yourself, it is not difficult (take CG engine as an example). First open the valve cover, and then align the T-mark on the rotor with the mark on the observation hole on the engine body. At this time, pay attention to whether the exhaust valve is finally closed. If it is the top dead center, it can be adjusted. If not, it needs to turn again, align the mark, and then adjust. If there is a feeler gauge, the valve clearance can be adjusted, The intake valve is 0.06mm. The exhaust valve is 0.08mm. If you feel it, the upper rocker arm can move left and right instead of up and down when the engine is hot


Send Inquiry

whatsapp

Phone

E-mail

Inquiry