Motorcycle Electric Warmer Hot Grip

* Pair of heated motorcycle grips
* Easy to fit
* Soft ultra grippy rubber provides comfort and feedback
* Suitable for all Motorbikes with standard handle bars:
Left Diameter- 22mm, Right (Throttle)- 25mm.
* Fast to warm-up:
Min Temp: 55 Degrees C
Max Temp: 70 Degrees C
* Rainproof switch- adjustable temperature control (2 temperatures available)
* Low Battery Drain: 2 amps
* Voltage: 12-15V
* Power: 5-35 Watt
* Handle resistance value: Between 10-12 ohms
* Working voltage: Between 12-16 volts
* Simple colour coded wiring to connect the two grips.
Red (Power) & Black (Earth) connections.

* Special Instructions:
You must fit a suitable 12V fuse with this item
Please seek professional assistance to ensure safe installation.
We are unable to offer any technical assistance when fitting these.

 

Matters Needing Attention :

【1】 When installing the left handlebar, do not twist the handlebar too much. Excessive twisting will
cause displacement of the heating wire

【2】 For models with balance iron, please adjust the installation position of the balance iron. Do not squeeze the handle when tightening the screws. The balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a gasket between the balance iron and the handle. Excessive extrusion of the handle will cause abnormal damage, such as difficulty in starting and moving the handle, electric heating wire extruding the handle surface, etc